Probleme mit Bild Auflösung bei Version 3.2


[ Antworten ] [ Ihre Antwort ] [ Forum www.supervisioncam.de ]

Abgeschickt von Andreas am 22 Februar, 2010 um 18:07:36:

Hallo,
in der Version 3.2 habe ich Probleme wenn ich die Bildauflösung größer 640*480 einstelle.
Die Kammera unterstützt die Auflösung und solange ich SVC nicht beende läuft auch die Konfiguration man sieht dann auch mehr im Bild, bei 640*480 sieht man 10 Meter und bei 720*576 sieht man die volle Breite von der Wand auf die die Kammera gerichtet ist 12 Meter.
Die Zeile 16+17 an die ich die vielen Sterne gemacht habe kann man dann auch nur noch mit einem Text Editor auf 640*480 setzen wenn man die Einstellung im Programm auf 720*576 oder 704*576 gestellt hat.
Hier die Konfiguration von der Cam:

[Capture Settings]
Trigger = 0
Reconnect if frames lost = 20
Rotate and Mirrored = 0
View Mode = 0
Disconnect If Stopped = 0
Overlay = 0
Delay = 0
Wait time for channel synchronization = 300
Timer = 500
Offset = 16
MaxTrouble = 1
FramesPerSecond = 25,000000
Set Frame Rate = 1
Reset format = 0
DoMotionDetection = 1
Depth = 24
Width = 640 **********************************
Heigth = 480 ************************************
TVInputType = -1
TVIndex = -1
CountryCode = -1
TuningSpace = -1
AudioSubChannel = 892350003
VideoSubChannel = 0
Channel = -1
InputID = 1
SourceType = 2
Device Name = Instant VideoMPX
DownloadPassword1 =
DownloadUser1 =
[Gerneral]
Auto Start = 1
Program = 3.2
[Save Image]
DelFileSize = 10
DelFileBySize = 1
DelFileDays = 60
DelFileByTime = 0
MB remain = 300
Text Alignment = 0
Logo Position = POINT(10,10)
Transparen Color = 16711935
Logo Image = logo.bmp
Transparent Logo = 1
Add Logo = 0
Title Position = 2
Image Title = &ImageTime%d.%m.%y %H:%M:%S&
Text Font.lfFaceName = Arial
Text Font.lfPitchAndFamily = 34
Text Font.lfQuality = 1
Text Font.lfClipPrecision = 2
Text Font.lfOutPrecision = 3
Text Font.lfCharSet = 0
Text Font.lfStrikeOut = 0
Text Font.lfUnderline = 0
Text Font.lfItalic = 0
Text Font.lfWeight = 700
Text Font.lfOrientation = 0
Text Font.lfEscapement = 0
Text Font.lfWidth = 0
Text Font.lfHeight = -28
Background Color = 16777215
Text Color = 16711680
Add Title = 1
Static filename for time scheduled = svc_ts
Static filename for motion detection = svc_md
Use static filename for time scheduled = 0
Use static filename for motion detection = 0
Quality = 59
Type = 1
Timer for Saving while Motion = -1
Timer = 10,000000
Nbr Of Saved Images Time Scheduled = 10
Nbr Of Saved Images = 100
Save Last Only Time Scheduled = 1
Save Last Only = 0
SavePreEvent = 1
Continuously = 2
Use Timer = 0
Enable = 1
Use Mask = 0
UseSubDirectory = 1
SubDirectory = &CurrentTime%y%m%d_%H&\
Directory = D:\WebCam\
[Inactivity]
Nbr Of Saved Images = 100
Timeout = 600
Trigger = 22431
Offset = 10
Fix Trigger = 0
Enable = 0
[AVI]
Sound Format =
Sound Device =
Add Sound = 0
Include next seconds = 5000
Capture AVI = 0
[Play Sound]
File = Camera.wav
Enable = 0
[External Trigger]
Pin = 0
Flags = 0
[External Switch]
SavePreEvent = 0
Save Last Only = 0
Continuously = 10
Timer = 500
Pin = 0
Flags = 0
[Minimize Window]
Timeout = 600
Enable = 0
[Send Mail]
MailPort = 25
MailPassword =
MailUser =
SMTP = 0
Sender = IhrName@IhreDomain
MailServer = mail.domain.com
Use DialIn = 0
AttachImage = 5
MailAddresses =
Subject = SupervisionCam Alarm
MailMessage = SupervisionCam hat eine Bewegung an Kamera &CameraName& am &ImageTime%d.%m.%y um %H:%M& festgestellt. Das Bild wurde gespeichert unter &ImagePathName&&ImageName&.
Timeout = 600
Use Timeout = 1
Enable = 0
[Run Program]
Timeout = 60
Program =
CommandLine =
Use Timeout = 1
Enable = 0
[Send Message]
Use DialIn = 0
MsgAddresses =
Timeout = 600
MsgMessage = SupervisionCam hat eine Bewegung an Kamera &CameraName& am &ImageTime%d.%m.%y um %H:%M& festgestellt. Das Bild wurde gespeichert unter &ImagePathName&&ImageName&.
Use Timeout = 1
Enable = 0
[Set To Foreground]
Enable = 0
[Time Activity]
Time 2 =
Time 1 =
[HTML Settings]
Static Names = 1
Destination Name = Destination.htm
Source File = e:\Programme\SupervisionCam\Source.htm
[Upload Settings]
Delete Old Files = 1
Use DialIn = 0
Server Directory = \SVC_Report
Server Name = \\ServerName
Password =
User Name = LoginName
Timeout = 600
Use Timeout = 1
Enable = 0
[RAS Settings]
Domain =
Password =
UserName =
Entry =




Antworten:



Ihre Antwort

Name:
E-Mail:

Subject:

Text:

Optionale URL:
Link Titel:
Optionale Bild-URL:


[ Antworten ] [ Ihre Antwort ] [ Forum www.supervisioncam.de ]